Capital Robotics - DC Wave Pulse MIG


	home • cells • support • robots • contact

Capital Robotics
911 US 301 South
Tampa, Florida 33619

800-635-7777

Fax: 813-626-0812

DC Wave Pulse MIG Welding Process


Wave Pulse Bead Apperearance (Aluminum Fillet Weld)		Superimposed Low Frequency Pulsed Waveform

BEAUTIFUL TIG-LIKE BEAD APPEARANCE
At Higher Travel Speeds and Efficiencies of MIG Welding

EXCELLENT OUT-OF-POSITION PUDDLE CONTROL
...And Moderate Gap Bridging Capabilities

LOW FREQUEBCY PULSED WAVEFORM
Control Low Frequency Pulse and Travel Speed to Achieve Desired Results

AGGITATES WELD PUDDLE
...To Reduce Crack Susceptibility and Porosity in Aluminum

Constant Penetration
	When switched on, the constant penetration control in the TURBO PULSE DF series utilizes a fuzzy logic feed back method that can detect changes in amperage when tip-to-work distance fluctuates, and increase or decrease wire feed speed to maintain a constant current, therefore maintaining constant penetration.
Cross-Section of weld sample Work Piece: 3/8” Mild Steel Wire: .045” Dia. Sheilding Gas: 80% Ar/20% Co2 230A 28V 24IPM

home • cells • support • robots • contact